Alxs650
XS650 Member
I changed my stator rotor, and now the bike won't start... And the kick start seems stuck, does not kick over like it did before What could I have screwd up?
DUDE before you destroy parts take stator back off and see if it kicks easy if it does you didn't seat it right and you can screw up the new one !!!!
It only goes in one way and has to seat correctly.
I seem to recall somewhere, sometime about the length of the stator screws being different and not getting them switched.....possible result in gouging the rotor rings. Hope I'm mistaken but something to check.
Hi was reading your post about the rotor screws. Mine did exactly what you described. Would you recommend changin the rotor? I have damaged the rotor with the screws and now my brushes dont make a "good" contact.I seem to recall somewhere, sometime about the length of the stator screws being different and not getting them switched.....possible result in gouging the rotor rings. Hope I'm mistaken but something to check.
Hi was reading your post about the rotor screws. Mine did exactly what you described. Would you recommend changin the rotor? I have damaged the rotor with the screws and now my brushes dont make a "good" contact.
Yea man I'm sorry. I was reading this post and remebered that my rotor had been damaged. Not too bad beause I still have contact from my brush to the rotor but might not be the contact that it needs.This information would have been real handy to know.............
Yea man I'm sorry. I was reading this post and remebered that my rotor had been damaged. Not too bad beause I still have contact from my brush to the rotor but might not be the contact that it needs.