kvanderploeg
The Dutch Terror
I finally got around to drilling my rear rotor. I drilled the front one about 5 days before my son was born, so things have been on the back burner. For the rear rotor, I used a progressive drill patter. The holes get smaller as you move from the inside edge to the outside edge of the rotor. Nothing terribly complicated here, but I thought some guys might like to see just how easy it is.
It does help to box up around your drill press with some cardboard to keep the metal chips from flying all over. I drill smaller pilot holes first, then come back to enlarge them. As with drilling any metal, slow on the drill press and plenty of lube.
Kent
It does help to box up around your drill press with some cardboard to keep the metal chips from flying all over. I drill smaller pilot holes first, then come back to enlarge them. As with drilling any metal, slow on the drill press and plenty of lube.
Kent