fossilrider
XS650 Member
Hey guys,more questions for "those in the know".I have made some headway on my conversion of the '82 Heritage Special into something a little less Harley-esque.Now I have a few small items I need input on.First,I'm looking for a set of low bars that I can fit all the switchgear,grips etc. on between the end and the bend.I have a nice set of "W" bars that would work if it weren't for the clutch safety switch being in the way when I try to slide the perch up far enough to get the grip on.The safety switch wire that sticks out of the clutch perch hits the left light switch housing.Next,the seat latch on the '80 special seat that I got off ebay unlatches the right side but not the left.It seems that when I pull the lever,the right side disengages allowing that side to rise up before the left side unlatches.Then there is the front brake light switch.I would like to install a single line from the master cylinder to the caliper and do away with the junction block,but what do I do for a switch for the front brake light? Thanks for any help.Steve