I have a few other threads, but. I’m having an issue running: intermittent cylinder dying, switches sides, fresh battery. Has Pamco, single coil (Honda), have used diff coils to rule out.
It was suggested to wire battery directly to coil to see if that works, which would indicate issue in wiring and switches.
how would I do this, would that be the read wire off the pamco? I know I wouldn’t want to leave it wired because that could dry the coil right?
It was suggested to wire battery directly to coil to see if that works, which would indicate issue in wiring and switches.
how would I do this, would that be the read wire off the pamco? I know I wouldn’t want to leave it wired because that could dry the coil right?