burns
OWG
I had a plug cap come loose from its coil wire - not compleely off but loose. The motor would run on the other jug and when I touched the "bad" wire I got a pretty good shock. The connector prong in the cap was broken so I replaced the cap (NGK). The cap that I put on reads 4.9 ohms on my meter. My ignition is PAMCO (dual tower coil). NGK BP7ES plugs.
The new cap didn't fix the problem. The motor will start and run on the other jug but the "bad" side will fire only if I hold the plug cap a little away from the plug. There is a fat blue spark.
I'm scratching my head. Do I need a new coil?
The new cap didn't fix the problem. The motor will start and run on the other jug but the "bad" side will fire only if I hold the plug cap a little away from the plug. There is a fat blue spark.
I'm scratching my head. Do I need a new coil?