As I expected, it does not work...
The only question I have is : does it matter to connect the white wires at the exact position they were before changing the plugs, or can they be mixed between them?
I unplugged the 6 pins connector and measured the resistance with the ohm meter calibrated M ohm.
I read between the R/R three different values between 0.5 and 0.7 ohm.
The issue is maybe the ground. I read in the Mike's explanations, that black wire could be forgotten because the R/R was dealing with it.
But as I have no current at all, I guess that the circuit is not closed.
I checked out the shematic and saw that brown wire had to be connected to the fuse box, but the 3 pins from the R/R has a green and a brown wire...
And does the oem regulator has to be removed from the frame or can I let it, just unplugged?
So I think I did my best and that I need help.