Ok coil test 3.5 on main terminals, getting 14,500 across plug terminals open on all other tests. Pamco test stock plug grounded well to head, wire attached, other plug wire attached to plug in bike. Cam pin out pamco rotor on loose, key on spin rotor and NO spark ( done with e-advance wired in line (soldered). Should this test be done without the e-advance? And I have no power to the sensor on green or red and checked 12.8v to both leads of coil and no drop from green. Soo any ideas??
The testing must be done with all wiring in its normal state, i.e. the E-advancer must be wired in, as its what controls the coil primary. No spark, so now is the time to contact Pamcopete, e-mail address on his web site.