PMa conversion, Regulators.

[Ketis]

Hi All,

I have a HHB pma with pamco ignition.

My bike died on me while riding awhile ago and i tested the stator and everything checks out good.

Im having a really hard time getting in contact with Hugh and i just want to get this thing riding

I was curious if this regulator will work, or if anyone has experience with it.

http://www.ebay.com/itm/Voltage-Reg...Parts_Accessories&hash=item27c7dd8de7&vxp=mtr

i just want to get back on the road, im missing waaaay too much riding time this season!

 

[ANLAF]

I can't help with that regulator, but have you done any mods to the bike since fitting the PMA, welding perhaps, or moved some of the wiring around?

Anlaf

 

[Ketis]

no, it was all new stuff. i only installed the wiring after all welding and powdercoating has been done. i got 150 miles on it and it quit while i was riding.

i checked out the stator with a multimeter and everything is ok 14-15 volts AC rms and around 30v peak for each phase with .8ohm resistance between all 3 phases.

 

[Bloody D]

what kinda resistance between the phases on the regulator? i think most of the 3 phase reg are interchangeable for 20 bucks it might be worth trying. Is it just not charging or overcharging? maybe something came loose in the wiring?

 

[Ketis]

I checked the wiring. It is all good. It doesnt charge at all.

All 3 wires have .8 ohm resistance between them and none of them are grounded out