WPGxs650_brat
XS650 Enthusiast
Question,
For for my build, my frame (78' XS650) started off with disk rear for brakes. I now have a switched to drum (I have a drum swing arm.) I am now left with the ugly rear master cylinder mounts (see picture.)
So my question to the guru's is;
Are the Rear Brake Master Cylinder mounts surface weld onto the frame, or is the frame (or mounts) beveled for the round bar for the mounts?
Essentially I want to cut the mounts off and have it look like a frame for a drum rear. But only if the mount are surface welded on. I don't want to have to patch the frame up (weld), only grind.
Cheers, and thanks for the input in advance
For for my build, my frame (78' XS650) started off with disk rear for brakes. I now have a switched to drum (I have a drum swing arm.) I am now left with the ugly rear master cylinder mounts (see picture.)
So my question to the guru's is;
Are the Rear Brake Master Cylinder mounts surface weld onto the frame, or is the frame (or mounts) beveled for the round bar for the mounts?
Essentially I want to cut the mounts off and have it look like a frame for a drum rear. But only if the mount are surface welded on. I don't want to have to patch the frame up (weld), only grind.
Cheers, and thanks for the input in advance