It has been a few years, but I've seen those Aussie scallops. They didn't fit. The metal badges shrink a bit and if they haven't updated them, they don't fit and that makes them garbage. Great if they've been updated to fit.
It has been a few years, but I've seen those Aussie scallops. They didn't fit. The metal badges shrink a bit and if they haven't updated them, they don't fit and that makes them garbage. Great if they've been updated to fit.
I seen those tank badges. are you sure they fit a special? The tank I have has the cap off center to the right.The ebay chrome "C's" fit perfect and look great on an early cover, mikes has early tank badges in black to fit special tanks.
Fuel Tank Badge - Yamaha Black for "Specials" Photo Badge Set - XS1 style to fit 1978-84 "Special" model fuel
Tank (Set of 2)
Give your bike a different look with these attractive Black and silver tank emblems.
Dimensions: 135mm long, 55mm high, 102mm from center of holes
Part #65-6506 $43.95 $39.95 USD Set/2
the XS650 scripts are a bit pricey but I think they have actually gone down some.
Correct.headlight does not turn on until the engine starts?
Thanks, gggary. But I find it odd I have 10+ volts feeding the low beam headlight, is that normal? When I switch to hi, the power disappears. Must be the magical rlu doing its thing?Correct.
Thanks, gggary. But I find it odd I have 10+ volts feeding the low beam headlight, is that normal? When I switch to hi, the power disappears. Must be the magical rlu doing its thing?
Clean all of the electrical contacts, especially the kill switch. A little corrosion at every switch or connector will cause a loss of current. Deoxit is a great choice if you can find it.
packed with dielectric grease.
Yes, dielectric grease should not go directly onto contacts. Its useful to add it around the area of the contacts, so that it can exclude water and oxygen from getting to the contacts.