Turn signal wiring from scratch

[Downer]

http://www.xs650.com/forum/showthread.php?t=61
I am running the simplified wiring on the thread above the first diagram and I'm trying to hook up some turn signals from scratch using the LFS-1-flat relay but in the diagram it shows three leads can someone explain how to hook it up cause the LFS-1-flat only has two leads thanx in advance

 

[XSLeo]

On the bikes wires the brown wire is power from the key switch, the brown/white goes up to the turn switch. The black wire won't be used.
On you LFS-1 Flat it will have a red and black or maybe grey and black. The red or grey wire plugs into the brown wire, the black into the brown/white wire.
Thats how I wired mine, works great.
Leo

 

[XSLeo]

Oops, just checked your diagram. It uses strange colors on the wires. I like to wire things using stock colors. Make trouble shooting easier.
Hook the red lead of your flasher to the orange wire, the black lead the red wire.
Leo