sdxs2
New to me XS2
So I have been chasing my issue for a while and cannot seem to get my left cylinder into a normal state.
My setup is a 72 with vm34s with plastic floats. Pamco harley dual fire coil, new 5k caps and wires.
I have ruled out many things. Valves were set good when I got the bike and have hot ridden more than 100 miles. Eliminated coil and spark by switching plug wires. This happened with points ignition also.
Carbs have new float seals and adjusted 22 to 23mm. New o rings in mixture screws.
Have also checked for intake leaks and finally tonight switched choke plungers and didnt seem to change on a short ride. Also have tried different jets. Sync should not be far off.
I am at a loss of what it is. Black sooty no matter what I do.
Finally a pic of where I am at with my build. From scrap pile for free to this....yes free.
My setup is a 72 with vm34s with plastic floats. Pamco harley dual fire coil, new 5k caps and wires.
I have ruled out many things. Valves were set good when I got the bike and have hot ridden more than 100 miles. Eliminated coil and spark by switching plug wires. This happened with points ignition also.
Carbs have new float seals and adjusted 22 to 23mm. New o rings in mixture screws.
Have also checked for intake leaks and finally tonight switched choke plungers and didnt seem to change on a short ride. Also have tried different jets. Sync should not be far off.
I am at a loss of what it is. Black sooty no matter what I do.
Finally a pic of where I am at with my build. From scrap pile for free to this....yes free.