71XS1B Carbs Overflow02 Put water in the bowl, cover the top of the overflow tube. Blow into the hose, watch for bubbles.
71XS1B Carbs Overflow05 The vertical splits are soldered as far down as possible. Then the tubes are coated in epoxy and slid down onto the overflow
71XS1B Carbs Overflow04 The overflow tubes are 3mm OD. Hobby brass tubing of 5/32" OD, 1/8" ID, 0.4" (10mm) long. These sleeves will repair the ove
71XS1B Carbs Overflow03 It gets worse. Not only were bubbles emerging from the base of the overflow tubes, but from vertical splits as well.
71XS1B Carbs Overflow02 Put water in the bowl, cover the top of the overflow tube. Blow into the hose, watch for bubbles.
71XS1B Carbs Overflow01 Attach a hose to the bowl's overflow barb.
71XS1B ThrottleCables Wanted to install new cables, but there's too many problems with the replacements. Wrong core diameter, solder wicked too far
71 BS38 ChokePlunger07 The new plugs MUST be trimmed to near flush with the crimped end of the plunger. Failure to do this will prevent the plunger
TwoManyXS1Bs

71XS1B Carbs Overflow02 Put water in the bowl, cover the top of the overflow tube. Blow into the hose, watch for bubbles.

There are no comments to display.

Media information

Album
1971 XS1B BS38 carburetor rebuild
Added by
TwoManyXS1Bs
Date added
View count
1,275
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top