IMG 19A Old bushing came out on 23/64 bit, this was the second of two drill bits to be used, the first bit should be a 11/32.
IMG 17- Close up of old bushing removed. Drill bit recommendations from Mike XS were spot on!
IMG 18- I used a magnetic screwdriver to swipe the leftover shavings, to make sure no metallic pieces were left over.
IMG 19 Start bushing in a clean application, before trying to set it flush.
IMG 19A Old bushing came out on 23/64 bit, this was the second of two drill bits to be used, the first bit should be a 11/32.
IMG 20 Tap in bushing with flat solid item.
IMG 21 Bushing is flush with outside of bearing, not case.
IMG 21A CLEAN everything before applying gasket cement, a great tip for NO leaks!
YAM277

IMG 19A Old bushing came out on 23/64 bit, this was the second of two drill bits to be used, the first bit should be a 11/32.

There are no comments to display.

Media information

Album
Clutch Pushrod Shaft Bushing Replacement Pics
Added by
YAM277
Date added
View count
471
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top