7
Reaction score
8

Latest activity Postings About

    • 7
      79Dano replied to the thread Cam chain guide wear.
      Yes. I tensioner on back side of the engine was ok and so I did not replace it. The front stopper guide was bad and I replaced it with...
    • 7
      79Dano replied to the thread Cam chain guide wear.
      Ok. Thanks for the advice.
    • 7
      79Dano replied to the thread Cam chain guide wear.
      Update. I found black plastic in sump strainer. It was more than a little but not enough to account for the entire stopper guide. I...
    • 7
      I went to buy some oil for an oil change on my XS650. My manual say to use SAE 20W-40 or 20W - 50. I noticed that some oils were...
    • 7
      79Dano replied to the thread Cam chain guide wear.
      Thanks for the procedure. That makes a lot of sense.
    • 7
      79Dano replied to the thread Cam chain guide wear.
      Interesting. I think mine is fine then. Thanks for your incite.
    • 7
      79Dano replied to the thread Cam chain guide wear.
      Thanks for the advice. I may be a little over concerned. I think I will just keep monitoring oil at changes for the black plastic...
    • 7
      79Dano replied to the thread Cam chain guide wear.
      I thought it looks like aluminum. I am going from memory. I never noticed black plastic or rubber. I will remove sump cover and look...
    • 7
      I have had nagging intermittent issue with self cancelling turn signals not working. I have replaced the module with a used part from...
    • 7
      79Dano posted the thread Cam chain guide wear in The Garage.
      I have 1979 XS650 Special II. The engine only has ~16k miles. I've noticed some sparklies in past oil changes and would like to...
  • Loading…
  • Loading…
Back
Top