R
Reaction score
21

Latest activity Postings About

    • R
      Randy N replied to the thread Carb issue.
      I have to buy a new timing light. Apparently, I gave mine away a while ago.😟. So today was static timing. I’ll do the hot water test on...
    • R
      Randy N replied to the thread Carb issue.
      So here’s where I’m at today. I pulled the carb apart and went through it and cleaned it. Nothing spectacular showed up anywhere, and I...
      • IMG_3973.jpeg
    • R
      Randy N replied to the thread Carb issue.
      Mechanical sync is good. Haven’t used vacuum gauges yet.
    • R
      Randy N replied to the thread Carb issue.
      Float height was too high. I did drop it. I measured without the gasket. Is that correct?
    • R
      Randy N replied to the thread Carb issue.
      Thanks for the replies. I will pull it off and strip it down and check it all against spec.
    • R
      Randy N replied to the thread Carb issue.
      I pulled the car apart and looks like all new parts inside. The mid range needle was on the bottom clip so I moved it up according to...
    • R
      Randy N replied to the thread Carb issue.
      Thanks!
    • R
      Randy N posted the thread Carb issue in The Garage.
      I am having some issues with the left carb on my XS2. it’s been a lot of years since I’ve been into one and wanted to ask a couple...
    • R
      Randy N replied to the thread New Member.
      Hi Raymond, Thanks for the compliment on the bike. It needs a little bit more work to finish it off but not much. The previous owner...
    • R
      Randy N posted the thread New Member in The Garage.
      Good Morning I am new to the forum and have just picked up a just about complete resto XS2. I bought my first one in 1972 when I was 17...
      • IMG_3779.jpeg
  • Loading…
  • Loading…
Back
Top