Y
Reaction score
15

Latest activity Postings About

    • Y
      yam-a-ha replied to the thread Wiring Harness for a 1978 XS650.
      Didn't actually see a date just the xs650 SE.
    • Y
      yam-a-ha replied to the thread Wiring.
      Thanks definitely no condenser under the tank on the frame. Two black wires there OK. One seems to run into the harness from the frame...
    • Y
      yam-a-ha replied to the thread Wiring Harness for a 1978 XS650.
      yes have the on off switch. she says se on the vin plate. shes black with steel side covers badges in gold, half chrome strip on saddle...
    • Y
      yam-a-ha replied to the thread Wiring.
      yes have spark with plug grounded both plugs ann odd puff nothing like she wants to start. tried starter fluid and gas down the plug...
    • Y
      yam-a-ha replied to the thread Wiring Harness for a 1978 XS650.
      hi, looks the same my se1979 model wiring. just wondering whats the brass box for and is there a condenser in there somewhere or is it...
    • Y
      yam-a-ha replied to the thread Wiring.
      not so good on the keys, but at least i'm getting answers thanks.
    • Y
      yam-a-ha replied to the thread Wiring.
      yes shes on points
    • Y
      yam-a-ha replied to the thread Wiring.
      Someone said the relay on the right hand side of the bike inside the side cover has one built in. Like the pic I posted. I'm no good at...
    • Y
      yam-a-ha replied to the thread Wiring.
      She's on points.
    • Y
      yam-a-ha replied to the thread Wiring.
      Only acquired it a few weeks back. I had an xs2 yrs ago. I'm a 400/4. Kz650 man myself. I can't get her to run. Cleaned carbs and jets...
    • Y
      yam-a-ha replied to the thread Wiring.
      I don't have one of those condensers under the tank. Is mine built into the relay on the right hand side of my bike.
      • IMG_20230921_185831.jpg
      • IMG_20230921_185820.jpg
    • Y
      yam-a-ha posted the thread Wiring in The Garage.
      Hi all. Bit confused here. I don't have a capisator under the fuel tank on the engine frame mount. I do have the relay on the right side...
      • IMG_20230921_191237.jpg
      • IMG_20230921_185831.jpg
      • IMG_20230921_185820.jpg
    • Y
      yam-a-ha replied to the thread Wiring.
      Thanks. If this was bad would it create a poor spark??
    • Y
      yam-a-ha posted the thread Wiring in The Garage.
      Hi all. So underneath the tank on my 650se there is a no engine mounting bracket that gas two wires (black) that are attached to it. One...
      • IMG_20230918_182702.jpg
    • Y
      Thanks. this is fitted the right way round, I'm not 100 percent sure about the advance side though. there are two lines here that are...
    • Y
      Excuse my ignorance what is the brim side??
    • Y
      yam-a-ha replied to the thread Carb.
      Pic
      • IMG_20230912_182333.jpg
      • IMG_20230912_182333.jpg
    • Y
      yam-a-ha replied to the thread Carb.
      Some pics
      • IMG_20230912_182358.jpg
      • IMG_20230912_182349.jpg
      • IMG_20230912_182344.jpg
    • Y
      yam-a-ha replied to the thread Carb.
    • Y
      yam-a-ha replied to the thread Carb.
      Thanks
    • Y
      yam-a-ha replied to the thread Carb.
      Thanks, i came across a schematics pic of the carbs like mine. it was for the xs650G, seems for japan market??
    • Y
      yes I have the same carb inners. the black rubbers go over the pilot jets and the brass washers go on before you put in your main jets.
    • Y
      yam-a-ha replied to the thread Carb.
      my float bowls don't look at all like those. they just have the drain plug hole at the bottom, no passage ways like in the pic. the...
    • Y
      yam-a-ha replied to the thread Carb.
      Thanks. i set to 22mm. brass floats.
    • Y
      yam-a-ha posted the thread Carb in The Garage.
      Hi all. i just got an xs650se special. 1978 i reckon. the carb is different slightly from others i seen the air mix screws ure upright...
  • Loading…
  • Loading…
Top