750

This is a custom rear wheel set up that I had a shop put together to put on my xs750 but I think the project is more trouble than it's worth. I do also have the drum brake set up with rear axle nut. Testing out the waters for right now Specs: - Converted 15" OEM wheel to a H-18x2.15" - 36...

EDIT: Making this into a 750 BBK installation thread. Picked up one of the 750 kits recently and was thinking about making the changeover before Spring. If I do, I will probably take some pics and document in my build thread, but wanted to ask a couple questions in a standalone thread for...

Hey guys, anyone got me ch experience with the Heiden tuning 750 big bore kit? I bought one the other day. Went to put it together and theyr forgotten to put the rings in. They're good guys so sent a set out. Rings Turned up yesterday, fitted them and event to put on the barrel but it seems...

hey all, so i just ordered a set of 750 barrels for my chop project. ive got a set of pwk32 i was going to run. does anyone have any tips or a good starting point jet wise? itll have open pipes and some kind of clamp on airfilters thanks

My custom chopper, 2+ years in the making. Started full stock all-original, barn find. The only thing 100% original left is the clutch lever. :-) 19" total stretch with hard-tail, gooseneck and 45-degree rake custom springer.

I'm about to start wiring a newly built 750 big bore engine and I'm looking for suggestions on which ignition to run. The stator is factory so it will probably need to be upgraded also. Since this is a frame-up build, I am starting fresh. So... what ignition unit should I put in this thing?

I got the bike out with the newer cvk's re-jetted with the 40/140/JJJ synced and running really well, did some calculations with the help of a roadside radar detector (my tach and speedo skip like crazy) and found my torque peak to be right at 4,500 rpms. That's where the engine runs out of...

Hey all, I'm at the point in my build where I need to make up my mind on what to order. I can't decide if I want to go with the 700cc piston kit from Hoos Racing or the XS performance 750cc kit. I have also been thinking about the 750 kit Hoos offers. I have fully disassembled the engine...

Looking to purchase a 750 big bore kit. Not sure where to buy from. I believe the kit is supplied by Heiden Tuning. Where is everybody getting there's from? Mikexs sells them for 699.00 I found another site http://www.650motorcycles.com/PartsPricing.html that sells them for 595.00 Anyone...

I'm planing to refresh/tune a current running engine for my 78 project. I'm looking at getting upgrading to a 750 bigbore kit and 5th gear overdrive from MikesXS. Aside from the following, What all would you recommend upgrading/replacing during this process? :shrug:

I know this has been covered quite a bit, but I was wondering the supporting mods needed to simply make it run smoothly. I have an opportunity to pick up the sleeves, pistons, etc for really cheap but not a lot left over for other things such as a cam and carbs, Bike is a '79, with mild...

Here's a link to how this all got started: Long Version Here's the short version: The right cylinder seized, I pulled everything apart and took the cylinders in to the local speed shop. I hoped the guys there would tell me I just needed to go 1st over and I'd be all good. They told...