pod filters

  1. A

    Looking for 3"ID pod filters with no step or flange inside.

    I want to use a pair of nice alloy velocity stacks on my RS/TM 34 carbs. The bellmouth on these stacks is 3", but so far I haven't found any pod filters that will not to some degree mess with the airflow improvement that I hope these stacks will provide. I even bought a pair of UNI UP-4300, only...
    • arcticXS
    • Thread
    • flatslides pod filters velocity stacks
    • Replies: 9
    • Forum: The Garage
  2. MadeThatMyself

    2FastMoto Foam Pods??? eBay Purchase

    As I rebuild my first XS650, I have been doing a ton of reading on what to do and what not to do thanks to all the contributing members on this forum. So first off, thank you all for sharing your expertise and experiences. In terms of pod filters, I have gathered that the consensus is the UNI...
  3. G

    Best Pod Filters?

    Hey ya'll. I'm going to be putting pod filters on my '79 XS and i'm wondering which you all like? I like the look of the K&N's but i want to know which is working best with your bike. I know i will have to finagle with the carbs but looking to do that as little as possible. Will also will...
  4. T

    Syncing Carbs with pod filters

    I currently don't have to do this because I did it when I had the stock air filters on but it came to thought the other day. When syncing carbs with pod filters is there anything different with the procedure that I should know? Using gauges of course. I was thinking this because the PCV...
  5. H

    Plugs looking lean with Pod filters and chopped exhaust

    If anyone out there can give me some help I would appreciate it. I have 1977 xs650 that I put pod filters on and iridium plugs. I have chopped exhaust but it is just about 6 inches shorter than original and has baffles. Since I have rebuilt the carbs (leaving the stock jets in the bowls) the...
    • Hammer
    • Thread
    • and chopped exhaust iridium plugs pod filters
    • Replies: 1
    • Forum: The Garage
  6. Square Circle

    Jetting advice when switching to pods?

    Okay, im going to ask this same old question for you expert carb guys.. Seems as if a alot of things contribute to the way a carb is jetted by what is modified with engine.. I have a 79 with bs38 carbs, I am looking to use the K&N pod filter " knockoffs from mikesxs." I already have them.. My...
  7. A

    Single best jetting advice I've found

    This is the best PILOT jetting solution I've come across for my '79 Special with: XS Performance Stainless Steel Headpipes - 1.75" (45mm.) OD XS Performance Reverse Cone Megaphone Mufflers XS Performance torque inserts XS Performance pod filters The advice: "These carbs are *really* easy to...
Back
Top