stator rotor

HHB PMA on my '78 xs650. The flywheel was slightly touching the stator wires that I thought were tucked away from danger and caused a wire to get exposed. This caused my battery to not get full voltage making the bike very poorly. I pulled the flywheel and noticed some wear on the inside in a...

hey guys so ive got a 79 motor thats been sat outside with out an alternator cover on for a while. to the eye the stator looks alright but wanted to know if theres any way of testing it without the engine running? ive just had 5 months off work after a crash so would rather not be spending any...

make me reasonable offers and i will ship from 95817. Everything is in pretty great shape. the rotor is a fully working rotor with original clips

So I replaced my bad stator and rotor with tested known good parts on my 83 XS650 TCI motor. The wiring is complete and correct and the bike gets spark. Brand new battery and known good carbs. Now that I have replaced the stator and rotor (bike was previously running but had a wiring issue and...

clear stator cover build so im looking at creating a stator/rotor cover for my xs. i machine/weld for a living so have access to any type of equipment i want. my thought was a clear lexan with polished aluminum in a style like this with my own design. wanted to know what materials have...

I have a 75 xs650 stock charging system, except for a solid state rec/reg from mikesxs. My stator is bad according to curlys guide. I have a 77 and a 78 xs650 I just picked up in decent condition, Can I swap out the stator from one of these? also do I need nylon screws because of the solid state...

i have my stator off and trying to take the rotor off but i dont know how to stop the motor from turning when i try and loosen the 17mm bolt that holds it on?b i tried it in gear and it just pushes my bike across the garage.