Okay, sorry to leave everyone hanging so long. I tested every component to the electrical system, tested continuity on all wiring and all tested out great! So this left me stumped. I pulled the entire wiring harness to get a better look and decided to rebuild from scratch, AGAIN. I wanted to clean everything up anyway. Put everything back in and it fired right up. So...I'm thinking that there was a bad connection that was intermittent somewhere in my harness. Testing out fine but if moved or something would disconnect.
So took it out for a test ride, ran good around the neighborhood so took it out for a cruise. Got going shifted into second and it died. SHIT. Checked everything on the side of the road and found a blown fuse. Replaced and started right up, took off and died again, FUCK!
Pushed it home, replaced fuse again and fired right up. While sitting it ran and idled just fine. Looking over everything when i moved the power wire running to the headlight and boom, died. Okay now we are getting somewhere. Wiggled the wire and fired up again, wiggled wire and died.
Tested that wire and its good, wiggled it still good, What the hell! Then noticed that my headlight was flickering...Pulled the headlight apart and what do you know...The power wire to the headlight was hanging by a thread (when I say thread I literally mean thread, the cloth braided insulation around the wire was all that was holding it together, intermittently making contact or grounding out and popping a fuse). Could this really have been the source of all my troubles...Never would have thought that it was a factory issue. I just assumed that it was something I did...
Anyway fixed the connection and fired right up, took it out for a 20 min ride and everything is perfect! I'm not counting my chickens quite yet but am hopeful I have worked out all the bugs.
Thanks everyone here for all the help!