Wherever.Whichever
Wherever.Whichever
Everclear.
^Could be. When I said "Special" that included lift off seat Don't have a full-blown Special w/o that ...
Hi xjwmx,The rototiller bars have to go. I suggest replacing with same-era CB750 bars. Same length so no need to change cables and hoses. Cheap because they're as hated in that community as the rototillers are in ours. But perfect for this application and will not give you rotator cuff.
oops, that should be 1989 (I just changed it). In 1979 I had a T110 and a different wife.That's it, man. And congratulations 40 yrs too late
So I've got the correct gage wire and a new fuse box so I will start re wiring the bike and see if I can't get her to turn over at at least run the lights without blowing a wire.
Fredintoon: you said and I quote "
A thing to check is if the carbs slow running needles still have the EPA mandated brass sealing plugs over them.
If so the first thing to do is rip them out of there and toss them. If they are still in place the carbs will still be set impossibly lean AND the slow running system can't have EVER been cleaned properly."
Does that include My '82 ...... I've alwayse hated the EPA crap,.... but I wann'a get it liscnsed again one day ! if they have to inspect my bike will they look for that plug ? should I pop it out tinker and put it back on there ? LOL
Bob........