Recent content by UCXS650

Got it working right without the brake switch.. if anyone has any idea where I could find a 10mm pull switch let me know thanks!

NULL CODE 1153

I figured since the wet test read at 160 it wouldn't be the gauge No harm in buying a second set though.. and yeah I only use the threaded gauges.. good insight though thanks.

man It's one of those things I wish I didn't so much.. I wish I didn't even have a compression gauge. The bikes doesn't have plates so I've been breaking it in through neighborhoods and I think that could be a problem.. Might need to throw on the plates from the cb650..lol

NULL CODE 1153

Thanks everyone, hope someone else finds this useful. I had a feeling that the a/f mixture screws were under there somewhere. Will try too pull them out without drilling.

NULL CODE 1153

So I just rebuilt my 81, new valve seals, bore, .50 over pistons and rings. Has 81 mikunis Has been running great, I Took it out for its first brake in phase.. and then decided then too change the oil as the bike had been rebuilt due too running low on oil, So I imagined it might still...

Sign me up!

Thanks for the help. for future reference I ended up just removing head bolts and and all covers and tapping in the cam bearing and then eyeing them through the exhaust covers with a flash light. seems too have worked well. but I still have about 1/16 of a gap that I thought the gasket would...

Bummer, well atleast I won't ever do that again. As the rebuild only has what 20 miles on it. Can I just loosen headbolts and then push the cam bearings in?

The other side was giving me trouble fitting too, I have just rebuilt the motor, had a little bit of oil leak from the right side(the one pictured) but since have been a little bit of sealer on it and haven't had any problems yet. would like too know what I could do about it.? thanks

Having trouble getting the cam cover too fit flush with the head. Wondering if this is going to be a problem Or if its supposed too be another way too decrease heat. Not sure whats going on here.

The head and cylinders were just bead blasted, and while I was waiting for them too finish the head work, I just carefully removed the paint from the bottom end, and what do you mean by the blond? My girlfriend? ?:doh:

Here is the resurrection of the no leaf clover, I brought this bike into my home(Dirty, running on one cylinder, leaking/burning oil from the pan, left exhaust and a few other places:doh:,) for a friend to rebuild, but as the weeks went by, parts came in, things got expensive. I ended up making...