stator

  1. M

    Wanted - Pick up coil (or stator with working coil attached) for 83 heritage special

    Hiya! I'm looking for a pick up coil for my 83 heritage special (part: 4M4-81670-10-00). Alternatively, if you have a compatible stator with the coil still attached, I'm up for that too! I'm located in Los Angeles. Thanks! Marie
  2. ninosboombox

    1980 charging issues, green wire needs to be grounded for slap test to work

    Hi Guys, Ive been rebuilding my 1980 yamaha 650 xs special 2, and have run into some problems, hoping the much smarter folks here can lend their expertise?? I have a new stator a new reg rectifier, new ignition switch, new stator, and a newer harness which was replaced in 2016 (all from mikes...
  3. Muckroot

    Static ignition timing inquiry

    Hello, I just rebuilt my engine and replaced a fair number of parts, and I am now having an odd problem statically timing the spark. Known variables: I do not know when the last time the engine ran before I rebuilt it. I had Hugh's Handbuilt rebuild the crank, it is not rephased. I...
  4. spacetiger110

    Yet another charging system thread

    Let me preface this thread by saying that I am electrically retarded. I could probably do a top end rebuild without a shop manual or Google or anything, but electrical work just baffles me. I just don't get it. I have a 1981 XS650 with the stock charging system. It's a tracker build, with turn...
  5. Muckroot

    Custom wiring diagram review needed

    Hello all, I've sketched up a wiring diagram for my 1975 XS650B, which is a hardtail chopper project. it has the stock alternator, as well as: a TCBro's reg/reg: http://www.tcbroschoppers.com/regulator-rectifier-yamaha-xs650-points-ignition-models.html. a TCBro's headlight...
  6. Muckroot

    Alternator specs

    Hello, I took some measurements on the alternator I have and I need to know if they are good readings. It will eventually get replaced with a PMA kit from Hugh's but those are expensive, I am broke, and they are out of stock at the moment anyway. So for now, I am hoping to be able to use this...
  7. IBeedle

    For Sale - Brand New Stator for 1980 +

    I have a new Ricks Electric stator for sale. I bought it off Parts Unlimited a little while ago but have since decided to go with the PMA set up. Its been sitting and I am now unable to return it. If given the asking price I will also throw in a set of brand new brushes Stator Part# 2111-0198...
  8. AndresM

    No Alternator // 1979 XS650

    After many years searching for an XS650 in Mexico in decent condition(they weren't originally sold here). I've finally found one thats close to where I live and in good condition. However it doesn't have an Alternator, I'm sure this question has been asked a thousand times but English being my...
  9. muskallunge

    PMA Troubleshooting

    My stator went out again. I didn't buy the stator from HHB but from all the list of "compatible" stators for the banshee swap. First one went because it was too wide and was rubbing on the rotor, grounded and also cooked my small battery. This one was narrower, had the clearance, was wired...
  10. anthony44

    Wanted - stock stator in good condition

    Rebuilding an engine on a budget so im looking for a stock charging system in nice condition that someone has laying around. I had a bunch of them in a box but threw them out last year so im pissed. Mostly looking for stator piece and a good points plate. All the ones on ebay seem shitty and...
  11. Grimmith

    Any Hire For Engraving?

    next will be my forks, then my exhaust..I'm not anywhere close to being done with this ( hopefully done in a couple weeks) I used to carve wood, so I gave metal a try. I can definitely get better at it quickly. I won't charge much at all, I could even draw up some badass designs for future...
  12. muskallunge

    PMA Banshee Swap Help

    I installed a Banshee rotor and a Kawasaki Vulcan/Drifter stator to my '78 xs650 using Hugh's Hand Built stator backing plate, stator mount & hardware. I had a wire rubbed through by the rotor rotation because I didn't tucked it away enough. When I pulled the rotor to inspect and fix the wire...
  13. muskallunge

    PMA Stator/Flywheel Wear: Need Advice

    HHB PMA on my '78 xs650. The flywheel was slightly touching the stator wires that I thought were tucked away from danger and caused a wire to get exposed. This caused my battery to not get full voltage making the bike very poorly. I pulled the flywheel and noticed some wear on the inside in a...
  14. C

    bench test stator

    hey guys so ive got a 79 motor thats been sat outside with out an alternator cover on for a while. to the eye the stator looks alright but wanted to know if theres any way of testing it without the engine running? ive just had 5 months off work after a crash so would rather not be spending any...
  15. D

    Help: diagnosing overcharging.

    Hey folks, Been cruising the forum for sometime but this is my first post. Y'all have been a wealth of information and frankly a pleasure to read about. Thanks for that! Now, onto the bike. It's an 82 haritage special, stock apart from the bars, the jerker exhaust system, and my upgrading the...
  16. Sucko Gomez

    Wanted - HHB PMA Stator

    Trying desperately to find a replacement stator. HHB is out of stock for a while, and I need a replacement. I am even open to non-HHB stators, as a substitute.
  17. lakeview

    Nylon Screws in Southern Ontario

    For those of you doing the mod that requires M4x0.7 - 12 nylon screws, I have found a source in Oshawa that will deal with the public. There is a $10.00 minimum charge, though, fortunately if you are there in person they also stock carb cleaner, Gunk, etc., so after you spend .45 on three...
  18. D

    XS400 pma charging system

    hey i was wondering if anyone has successfully done a pma swap on the 400 using the banshee or the HHB kit?? Ive been all over the forum and the topic has been dead for years on there
  19. NorazDad

    My PMA won't charge

    An '81 H Pamco EAdv and HHB PMA I have been getting no charging of my battery due to no output from the stator. The other day I took the rotor off and inspected it. It was clean as could be, but the unit had gotten hot enough to melt the logo off of the rotor. I took the stator off and...
  20. H

    removing stator from pma

    Can someone tell me how to remove the stator from mikes pma setup. Special pully?
Back
Top