rossness
XS650 Enthusiast
Hey guys,
Trying to rewire my 76 650C. I've worked on just about everything mechanical on this bike but the wiring is garbage and it's currently not starting (battery is good, fuse is good, no power to key). I figured it was time to rewire anyway so I jumped in. Now I'm a bit stumped...
I've got almost everything buttoned up inside the headlight bucket. I've been following the diagrams posted on this link and it's been working well so far.
76c-wiring-question-for-the-wizards.48999
76c-assembly-manual-parts-manualt19-19-jpg.98141
However, on that diagram there is a brown wire coming from harness left and handle right, which I'm assuming are going into the main (#6). However, I don't have the two pin connector on mine, just bullet connectors. Does it matter which wire goes into which?
Thanks in advance!
Trying to rewire my 76 650C. I've worked on just about everything mechanical on this bike but the wiring is garbage and it's currently not starting (battery is good, fuse is good, no power to key). I figured it was time to rewire anyway so I jumped in. Now I'm a bit stumped...
I've got almost everything buttoned up inside the headlight bucket. I've been following the diagrams posted on this link and it's been working well so far.
76c-wiring-question-for-the-wizards.48999
76c-assembly-manual-parts-manualt19-19-jpg.98141
However, on that diagram there is a brown wire coming from harness left and handle right, which I'm assuming are going into the main (#6). However, I don't have the two pin connector on mine, just bullet connectors. Does it matter which wire goes into which?
Thanks in advance!
