breaker plate Screws and flat Washers

[njrmahoney]

Can anyone tell me what size these screws are?
Mikes has them as #14-0655. I would like to get them at lowes. I lost mine.

Thanks.

 

[jayel]

believe they are 6mm x 1 pitch 14mm lenght

 

[XSLeo]

Get Allen head screws. Much easier to work with.
The same on the screws that hold the points and half plate. Use Allen bolts. If you can't get them the right length, get them a bit long. Just assemble the points to the plates and on the back side grind the bolts just above flush. Mount the half plate to the full plate and grind off the extra.
This will greatly ease adjusting points.
Leo