Ok I'm FOR SURE calling this victory.
Oiled the Uni UP4200 pods. Just spritz on mix from a windex bottle . The real "not running worth a #$%#" problem was the almost completely broken TCI pick up wire.
This is with float set to 21.3mm at the "upper flange", 137.5 mains 45 pilots 3 turns out on the idle screw.
probably will go in and lean it out a bit, though the plugs don't look too bad. just pulled them after that video not a plug chop. TDC mark is spot on using eyeball in the plug hole method. so idle timing is a bit retarded.
OH, installed fluid and bled front brake so it stops now! Need to bed the new shoes into the FZR600 rotor yet. you can see I don't have full contact yet n the oil bottle pic. Full gear for road test this time, up hill, up through 5th gear all good!