angus67
Welder's penetrate deeper!!
got my new O-rings in from McMaster-carr, put those in, fired it up. but only on one side. switched plug wires and symptom didn't follow. dead on left side. Pulled the plug, wet, of course. Put in a different plug, it tried to fire a couple times, then, nothing. I'm soaking a new fouled plug in seafoam overnight.
I have the mix screw out 1 turn per manual, valves set at .003 in, .006 out.
But it ran long enuf to check voltage. at 1200 rpms, 13.5 v, at 2500rpms, 14.8. I need to adjust my regulator before I fry my good battery.
I have the mix screw out 1 turn per manual, valves set at .003 in, .006 out.
But it ran long enuf to check voltage. at 1200 rpms, 13.5 v, at 2500rpms, 14.8. I need to adjust my regulator before I fry my good battery.