RFLIVES
Resident Sidecar nut
Check out these pic's I thought these plastic retainers were suspect from the get go. After 10 miles of shake down runs's I have a tapping no problem just need to reset the valve lash i think to my self. Three of them had lost the plastic ring on them. Adjustment is still pretty close not way off. Think i'm good with leaving them be? swaping them means pulling the motor as you cant just back them out.
also check out the shavings in the filter left over debris from the # 4 starter gear grinding away. I did a 2nd over bore with new pistons and new cam and rockers
also check out the shavings in the filter left over debris from the # 4 starter gear grinding away. I did a 2nd over bore with new pistons and new cam and rockers