Airwolfie
XS650 Guru
thats the spirit ! well done that man.
Guess I'd better brave the cold and do somethin myself tomorrow
Thanks Peanut! Guess I've gone and done it now!! you will probably finish yours tomorrow HA!
thats the spirit ! well done that man.
Guess I'd better brave the cold and do somethin myself tomorrow
You know that's right!Feck it, just run it! Worst case, she will leak a bit! Than you know you need to retorque!!!
thats good progress AW well done
Don't forget tomorrow when you shoot off down the road and apply the brakes there may be a surprise.
I replaced my front pads a while back ,packed my tools and jack away got in the car drove it down our drive swung round the bend at the bottom of the hill and braked sharply a few feet from the front of my neighbours car and my brake pedal went all the way to the floor ! fuuuuuurk kin ell
Pumped the brakes like crazy and stopped inches from their bumper. !
I'd forgotten to pump the brakes after pressing the pistons back to insert the pads ! It took quite a few pumps before the pads touched the disks .
well if you must do all this fancy brazing of tin boxes lol
I know... I do feel ashamed really.
My next job is fitting the battery and fault finding all the wiring and I don't fancy that out in the cold ....wuss
At least you've licked one of the really difficult and timeconsuming jobs
Very cool round box You have made.
Just keep plugging away and You will be starting her up before you know it.
-
Three more thigs sorted! Whooo!!
It didn't take me long to do this, if all the things on the list are like this I could finish her off this weekend Hehe!
That's it for now!!
wow thats impressive. I thought it was going to take a while looking at your list .
The race is still on for the first to MOT