When was the last time you did this

[Mikey]

I'm in the shop and Badfinger is blasting My Baby Blue I got the sump put back together 7lbs torque on the bolts
And while pouring the oil into the bike from a 1 gallon jug and I see this
And I even put a rag down to catch any drips from adding the oil

 

[Mikey]

After cleaning up the mess I found this in the other room and the mellon in the garden
All in all a good day
Beer 30 on the patio

 

[Boog]

You just reminded me I haven't had a beer today!

 

[Kevin Werner]

Bad Finger is good...

 

[Jim]

I can neither confirm nor deny I've ever done that...

 

[Grimly]

And I've never taken a sink trap off to clean it out and rinsed it under the tap.
In the same sink with no trap...

 

[Mikey]

And I've never taken a sink trap off to clean it out and rinsed it under the tap.
In the same sink with no trap...

Been there done that
Don't ya feel glad when your making great progress

 

[kshansen]

I'm in the shop and Badfinger is blasting My Baby Blue I got the sump put back together 7lbs torque on the bolts
And while pouring the oil into the bike from a 1 gallon jug and I see this
And I even put a rag down to catch any drips from adding the oil
View attachment 196501

That's nothing I bet I can beat all of you combined!

Try changing the oil on a 12 cylinder Cat Genset. One where it takes something like two 55 gallon drums of oil to fill the sump! Then do it out in the field where the only way to get the oil into the sump is to pump it by hand. Then just as you finish the first barrel and climb out of the trailer the genset is in to switch the pump to the second barrel you see oil running on the ground! Not sure how many gallons came out before I got the drain valve shut off but it was a good amount. I was working by myself and the plant I was servicing the genset for had lots of oil so no one ever knew plus the trailer was on fresh fill of crushed stone so it soaked in pretty fast!

 

[650Skull]

I'm in the shop and Badfinger is blasting My Baby Blue I got the sump put back together 7lbs torque on the bolts
And while pouring the oil into the bike from a 1 gallon jug and I see this
And I even put a rag down to catch any drips from adding the oil
View attachment 196501

Been there done that...........I know not to walk away and leave the sump plug out to drain that last few drops.......i know not to walk away and-----i know not-----

And I've never taken a sink trap off to clean it out and rinsed it under the tap.
In the same sink with no trap...

Who me

 

[kshansen]

Been there done that...........I know not to walk away and leave the sump plug out to drain that last few drops.......i know not to walk away and-----i know not-----



Who me

One habit I got into at work was to never screw in a drain plug unless I had the wrench to tighten it in my hand.