IMG 65- Friction plates on Ferodo are installed with the plate on the left first and last in sequence, while plates on the right are installed in the
IMG 62- A couple of pics showing the correct end of the pushrod.
IMG 63- Just showing a different view for this specialty tool.
IMG 64- Special tool available at MikesXS.net for removing the center nut, without damaging hubs. Part # 35-5021.
IMG 65- Friction plates on Ferodo are installed with the plate on the left first and last in sequence, while plates on the right are installed in the
IMG 66- For 1979 the 7 Friction plates have 2 different friction plates installed first and last. The metal clutch plates go after every friction plat
IMG 67- Instructions show 2 hours to soak plates before installing, while some recommend 24 hours.
IMG 68- Oil up the plates, before installing. Some recommend 24 hours.
YAM277

IMG 65- Friction plates on Ferodo are installed with the plate on the left first and last in sequence, while plates on the right are installed in the

There are no comments to display.

Media information

Album
Cush Springs / Dampening Springs Guide for Replacement
Added by
YAM277
Date added
View count
460
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top