IMG 67- Instructions show 2 hours to soak plates before installing, while some recommend 24 hours.
IMG 64- Special tool available at MikesXS.net for removing the center nut, without damaging hubs. Part # 35-5021.
IMG 65- Friction plates on Ferodo are installed with the plate on the left first and last in sequence, while plates on the right are installed in the
IMG 66- For 1979 the 7 Friction plates have 2 different friction plates installed first and last. The metal clutch plates go after every friction plat
IMG 67- Instructions show 2 hours to soak plates before installing, while some recommend 24 hours.
IMG 68- Oil up the plates, before installing. Some recommend 24 hours.
IMG 69- Ferodo friction plates are available at www.650central.com
IMG 70- A little controversy here on the forum, on which oil to use. My choice was to go with 10W-40, because of the JASO-MA rating was selected by so
YAM277

IMG 67- Instructions show 2 hours to soak plates before installing, while some recommend 24 hours.

There are no comments to display.

Media information

Album
Cush Springs / Dampening Springs Guide for Replacement
Added by
YAM277
Date added
View count
437
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top