IMG 70- A little controversy here on the forum, on which oil to use. My choice was to go with 10W-40, because of the JASO-MA rating was selected by so
IMG 67- Instructions show 2 hours to soak plates before installing, while some recommend 24 hours.
IMG 68- Oil up the plates, before installing. Some recommend 24 hours.
IMG 69- Ferodo friction plates are available at www.650central.com
IMG 70- A little controversy here on the forum, on which oil to use. My choice was to go with 10W-40, because of the JASO-MA rating was selected by so
IMG 71- Close up shows for V-twins and wet clutched.
IMG 79A- For 1979 models, they had the double bar set up, which usually gets replaced by most owners, with a single piece pushrod.
IMG 72- Important "JASO MA" oil rating, used for "Wet Clutches".
YAM277

IMG 70- A little controversy here on the forum, on which oil to use. My choice was to go with 10W-40, because of the JASO-MA rating was selected by so

There are no comments to display.

Media information

Album
Cush Springs / Dampening Springs Guide for Replacement
Added by
YAM277
Date added
View count
462
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top