Media added by YAM277

Navigation

  1. XS650 Originals and Restorations 178
  2. XS650 Choppers 31
  3. XS650 Bobbers 126
  4. XS650 Trackers 163
  5. XS650 Cafe Racers 102
  6. XS650 Slightly Modified 147
Browse albums

Media comments

  • gggGary
    Jim's Paint
    Love Jim's painting!
  • Tim Meaders
    Spoiler
    This was my original one-off design, it was scrapped and replaced with a new wider version.
  • P
    Spoiler
    where can I get this spoiler

Most media items

  1. YAM277
    510

    YAM277

  2. TwoManyXS1Bs
    502

    TwoManyXS1Bs

  3. I am Carbon
    500

    I am Carbon

  4. Mike G
    472

    Mike G

  5. Mailman
    463

    Mailman

Media statistics

Categories
6
Albums
2,942
Uploaded media
25,481
Embedded media
18
Comments
1,628
Disk usage
4.6 GB
IMG_2926.jpg

IMG_2926.jpg

  • 0
  • 0
IMG 09-Just a pic of the assembly, showing the "Shim", slightly installed off the bottom of the gear drive.

IMG 09-Just a pic of the assembly, showing the "Shim", slightly installed off the bottom of the gear drive.

  • 0
  • 0
IMG_2423

IMG_2423

  • 0
  • 0
IMG_2925.jpg

IMG_2925.jpg

  • 0
  • 0
Acorn nuts (6), this is using the first chart, as a preference, not the second chart.

Acorn nuts (6), this is using the first chart, as a preference, not the second chart.

  • 0
  • 0
IMG 08-Close up on the "Shim", showing the part no. and package it came in. Also the approximate size dimensions, in case 5Twins is watching?

IMG 08-Close up on the "Shim", showing the part no. and package it came in. Also the approximate size dimensions, in case 5Twins is watching?

  • 0
  • 0
IMG_2422

IMG_2422

  • 0
  • 0
IMG_2924.jpg

IMG_2924.jpg

  • 1
  • 0
Acorn nut with copper washer and blue locktite

Acorn nut with copper washer and blue locktite

  • 0
  • 0
IMG 07-The adapter(standing vertically), with the oil seal up front. Looking through the opening of the "Housing"(#1 on the chart) of the Tach Gear As

IMG 07-The adapter(standing vertically), with the oil seal up front. Looking through the opening of the "Housing"(#1 on the chart) of the Tach Gear As

  • 0
  • 0
IMG_2421

IMG_2421

  • 0
  • 0
IMG_2922.jpg

IMG_2922.jpg

  • 0
  • 0
Stainless Steel M8 nut and washer, with blue locktite. You can see how far down the threaded dowel extends? This would be where the Acorn nut #12 is s

Stainless Steel M8 nut and washer, with blue locktite. You can see how far down the threaded dowel extends? This would be where the Acorn nut #12 is s

  • 0
  • 0
IMG 06- Oil Seal(part number 93104-07036-00), installed in the Housing (part no. 256-17811-01-00) http://www.partsfish.com/oemparts/a/yam/50041bd1f870

IMG 06- Oil Seal(part number 93104-07036-00), installed in the Housing (part no. 256-17811-01-00) http://www.partsfish.com/oemparts/a/yam/50041bd1f870

  • 0
  • 0
IMG_2420

IMG_2420

  • 0
  • 0
IMG_2921.jpg

IMG_2921.jpg

  • 0
  • 0
Opposite side of bottom case, with M8 nut, washer and blue locktite. This is #9 on locator picture chart.

Opposite side of bottom case, with M8 nut, washer and blue locktite. This is #9 on locator picture chart.

  • 0
  • 0
IMG 05- Careful ordering this part number shown in the picture. The black O-ring is not as tight as the red one! RED O-Ring part number should be 932

IMG 05- Careful ordering this part number shown in the picture. The black O-ring is not as tight as the red one! RED O-Ring part number should be 932

  • 0
  • 0
IMG_2419

IMG_2419

  • 0
  • 0
IMG_2931.jpg

IMG_2931.jpg

  • 0
  • 0
IMG 04-The breakdown of all the parts in the assembly.

IMG 04-The breakdown of all the parts in the assembly.

  • 0
  • 0
IMG_1401

IMG_1401

  • 0
  • 0
IMG_2418

IMG_2418

  • 0
  • 0
6CopperWashers. Here is the location choice I used. The other photo was very descriptive, just wasn't sure of having the 2 acorn nuts side by side, li

6CopperWashers. Here is the location choice I used. The other photo was very descriptive, just wasn't sure of having the 2 acorn nuts side by side, li

  • 0
  • 0
Back
Top