IMG 04-The breakdown of all the parts in the assembly.
IMG 01- Better view of the R.H. Case Cover, showing where the Tach Drive Assembly goes. Note: the lower hole is where the Tach Drive Retention Bolt(#5
IMG 02-If you are taking out the Tach Drive Gear Assembly, without removing the R.H. Case cover, you might drop #8 on the chart, called the "Shim". If
IMG 03-The "Gasket" or the Copper Washer-(#6 on the chart, part no. 90430-06014) - that goes onto the Tach Drive Retention Bolt (#5 on the chart). #5
IMG 04-The breakdown of all the parts in the assembly.
IMG 05- Careful ordering this part number shown in the picture. The black O-ring is not as tight as the red one! RED O-Ring part number should be 932
IMG 06- Oil Seal(part number 93104-07036-00), installed in the Housing (part no. 256-17811-01-00) http://www.partsfish.com/oemparts/a/yam/50041bd1f870
IMG 07-The adapter(standing vertically), with the oil seal up front. Looking through the opening of the "Housing"(#1 on the chart) of the Tach Gear As
YAM277

IMG 04-The breakdown of all the parts in the assembly.

There are no comments to display.

Media information

Album
Tach Drive Gear and Assembly
Added by
YAM277
Date added
View count
633
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top