BowlingSS

The other leg was 34mm with a 35mm bottom.

Guys I found a left 34mm fork bottom. Thanks for all your help.

The bike I bought had the wrong lower left fork bottom. I need one.

So it looks like I have the wrong lower. Anyone have the correct left lower? Thanks. Bill

What if I had a seal that was about 1mm more on the outside dia. The forks are 34mm dia. I need a seal about 47mm x 34mm. Does anyone...

I found another set laying around. Fork bottoms are painted. The fork tubes are a little longer and the inside valve is different. The...

They look right but they are not.

They came off a 73 TX650. My parts list is way off. It shows 72 and 73 the same. I am not sure what to do about the one bottom that the...

Just found out the left fork bottom is not a stock one. The seal was very loose. It also has the bottom that takes a dual disc. Both...

I have the bike torn down. I have the forks laying on the floor and I noticed a lot of water coming from one of the tubes. The water was...

I did get a lot of good parts for the bike. Thank you Norton.

Needs a lot of cleaning. Hate getting the pressure washer out with snow on the ground plus it is cold (20's).

It does look better than it is. The front fender and tank need replaced along with a few thousand dollars for parts.

I got it. Just did a search. Thanks.

I do not see the early models.

Not sure about this seller. Be careful.

It might be easier to just use a 70-72 tank.

I have the tape above ordered.

Item currently unavailable at cmsnl.

I need a gas cap for the 73 TX650 coming late this week. I have some parts. Does anyone have a drawing with part numbers? Thanks. Bill

Winter project. Should have this one next week. Happy New Year everyone. Bill

Serial number was S650-215257. Serial number is a 73. Bill

I think I might of had a 72 seat with a 72 tank. This was my first rebuild in 2021.