carbereters

BS-34's off an 80SG. So... I ordered a pair of 135 mains from Partzilla... .... received these.... They are identical to the 135 air jet and smaller than the mains....... They will in fact.... fit into the hole for the main...... So, my question is, will they work as mains or did...

Hi All, So I've been reading this site, the carb guide and watching as many videos as I can about carbs and the time has come to take my XS2's BS38's apart. I should point out that I have never taken apart a carb before... When I bought the bike it ran but when the petcocks were turned on it...

Hi all, A little advice please. Should i replace this float needle or not?

It took me a while to get my XS650 running right. With the help of everyone on this forum, luckily, I think I finally got her running the way she should be. With continuous changes to the carburetor, I finally think I figured out the perfect set up. First I adjusted my cam chain to spec, timing...

Hey guys, was looking at getting some new exhaust for my bike (1981 xs650). The stock baffles in the stock muffles have rusted out, causing the bike to sound like crab, especially when down shifting. I was just curious if anyone knows if there are any exhaust mufflers that have the same amount...

8-1 COMPRESSION Just like taking the cam out and putting another in its place........stone simple...........there is one drawback and one good thing........a brand new chain I don't think would go on because the head is .040 thousands higher..........BUT a good used chain will return to it to...