float bowl

Hello again everyone, I greatly appreciate the help this forum gives me, and I am having a blast exploring this bike. Now I need some more pointers, in my case some good quality vendors for these carb parts. So, I believe I have discovered the source of my gasoline leakage out of my carb air...

I purchased 2 carb rebuild kits to freshen up my stock bs38's on my 1973 tx650. Well when I had trouble getting the pilot jet out, I gave it to my brother in law since he was sure he could remove it with an EZ Out extractor. He ended up stripping the bowl threading itself. So now i'm in need of...

Boats .net shows them as being 3F7-14984-00-00 with shipping they are asking in the area of $20.00 each. Now searching on Ebay I see these ...

I recently rebuilt my engine and was having issues with one of the cylinders running rich at idle. I went through everything and finally found what the problem was. The float bowl. I swapped carbs from left to right and the rich condition followed the carb. I then swapped float bowls and the...

I installed a nut to secure one M4x16 SST socket head screw to a float bowl screw hole that I stripped. Will that suffice or is some other addtional action necessary? Not sure whether I need to add a tad of blue loctite on threads around nut. I don't have the stomach or expertise to...

Can someone help me? Getting kind of annoyed, not sure what to do now. Got an 82 XS650. Just recently put a Pamco ignition on and cleaned my carb, putting new seals all around. The problem is I have a leak on my right float bowl drain screw and drain hole. I put new screws in and it still leaks...