Wanted - A little help?..Need a blown rectifier ('77 ish) for connector

[Wharfcreek]

Hopefully I can impose on some community good will here. I need a 6-pin Molex connector, the 'male' end, off a rectifier from roughly a '77. My bike is actually a '79, but I think this rectifier was used maybe back beyond even '75? Not really sure. I recently attempted to 'replace' mine....but in the process it literally crumbled to pieces. I now have it cobbled together....and seems to be working...but I'd like to fix it properly. I ordered a 3-phase / 50 amp rectifier off 'the bay'.... just received it....and I'd like to wire it in with a good connector if possible. Was hoping maybe someone had a blown unit that they'd be willing to part with for cost of postage plus maybe a few bucks? Any help would REALLY be appreciated!!

Many thanks,

Tom Dickinson
1840 Chesapeake Rd
Pasadena, MD 21122

 

[jtoolin73]

Is this what you're looking for?
this one is not blown but i don't need it.
$13.00 + an envelope

Joe

 

[cycleranger]

http://vintageconnections.com/

MP6N $2.50

 

[member3480]

Do you just want a connector MALE/FEMALE????

 

[grizld1]

OP, as the pics posted above show, the rectifier connectors for all XS650's from 1970-1979 are 6.3 mm. spade type in nylon shells; in fact there were no pin type connectors used anywhere in the XS650 harness in those years. Cycleranger has sent you to the right place. I've bought from Vintage Connections several times over the years, and their products and service are excellent.