Hi. Anyone with good starting points for jetting bs34? Ive red several threads and carbguide which ill follow. Just seeking a Good starting point. And i wanted to Share what i think is stock euro bs34 carb jets/needle/settings.
I have the canadian needle, adjustable and 2nd clip from top and matching needle jet for it.
45 Pilot
132.5 Main
130 air jet
I believe this was stock atleast for the bs34's sold in sweden
Im 3 turns out on mixture screw.
Bike starts easy and idles fine, but dont wanna run it lean during break in.
My setup:
Uni Pod filters with 1.5" exhaust and free flow cans from cone engineering.
700cc
277 rephase with stock rephased cam.
Minor head porting, more like a clean up from casting flaws.
I have the canadian needle, adjustable and 2nd clip from top and matching needle jet for it.
45 Pilot
132.5 Main
130 air jet
I believe this was stock atleast for the bs34's sold in sweden
Im 3 turns out on mixture screw.
Bike starts easy and idles fine, but dont wanna run it lean during break in.
My setup:
Uni Pod filters with 1.5" exhaust and free flow cans from cone engineering.
700cc
277 rephase with stock rephased cam.
Minor head porting, more like a clean up from casting flaws.
Last edited: