Wanted - clutch push rods

[killerb68]

Hello I need all clutch push rods and ball for an 81 basket case I picked up....Thank you....Brian

 

[Motrhedd]

you can buy a rod that takes the place of both short ones and a ball at mikes xs for 15 bucks

 

[killerb68]

Thanks for the info....i will still need push rod #1 correct?

 

[Motrhedd]

mikes xs part # 39-6511
Clutch Pushrod ( Long one-piece rod). - Replaces both inner and outer pushrod
and outer ball bearing used on 76-84's. Provides more stable action and allows
less wear of clutch pushrod seal (Note photo not to scale).
Fits: 1970-84 650's. Stock original type for 1970-75 models
the ball is on the same page

 

[killerb68]

Yeah...I checked that out...I guess the part I'm referring to is the part that actually comes in contact with the pressure plate.....Thanks again....Brian

 

[Motrhedd]

heres everything involved minus one ball ,which part do ya need.

 

[killerb68]

Im missing all of it....but the top piece is what i would need if i ordered the one piece rod from mikes