Looking for machine shop in Portland OR

[Roto36]

Can anyone from the Portland OR area recommend a machine shop to mill some pistons? SE area preferred but will look at any. I need to bring my compression ratio down a bit.

Thanks

 

[sseres]

Gary and Kevin at napa on SE 9th across from Fast Bikes and Grand Central Bowl. Over bored, honed and were great guys to work with.

 

[Roto36]

Thanks for suggestion, Napa declined. Said they're not setup for this type of work.

 

[pckopp]

Can anyone from the Portland OR area recommend a machine shop to mill some pistons? SE area preferred but will look at any. I need to bring my compression ratio down a bit.

Thanks

This place was recommended by a friend who I trust.

Ron Black
http://www.rb-designs.com/

Northwest of downtown a ways.

Good luck!

 

[650performance]

Call the guys over at Vicious Cycle. They do a lot of race engine work and can probably steer you in the right direction.

 

[Roto36]

Thanks everyone, I will certainly call them all. Here's my thread on the pistons I'm looking to modify.