3andit
XS650 Enthusiast
Hey guys, I have been rewiring my 75 XS and have run into an issue with my tail light not lighting up when I turn the ignition on. When I turn the ignition to the second setting it lights up my tail light as if I have the brakes on. I am using stock hand controls, stock wiring harness, and stock lighting all around. The only thing that I'm using that isn't stock are the speedo and tach. and on a side note, on these old bikes did the clearance lights (signals) turn on when lights were switched on if so I missed something there too ! Oh and when testing the system my flasher, flasher plug and wires melted down too.... What would have caused this as it was working fine when testing before. I had read somewhere on the forum that the 75s were prone to melting down, or did I screw up here too
As always thanks in advance!
As always thanks in advance!