I believe this question has been asked many times before, but I cannot find the float height spec for the PWK 32mm Keihin carb. I’ve seen recommendations of 19 mm but for those that have these carbs, you know that’s impossible because the floats will hit the carb body. When I disassembled my carbs for cleaning the float height measured approx 23.5 mm. I adjusted them down to close to 22 mm but now the bike is running super rich. I’m suspecting float level may be contributing to this condition.
Can anyone provide me with the spec height or let me know the height you have used to make the carbs function properly, thanks.
Can anyone provide me with the spec height or let me know the height you have used to make the carbs function properly, thanks.