Brian902
XS650 Junkie
I heated my cylinders in the Barbecue to 200 degrees and came out to find the cylinder had slid down the sleeves.
After a day of scratching my head, I reheated the cylinders to 200 degrees, on the Barbie,
took the cylinder back into the work bench, dropped each sleeve back in and job done.
In your case I would get the machine shop to plane the head until one even surface with the minimum amount of planing.
After a day of scratching my head, I reheated the cylinders to 200 degrees, on the Barbie,
took the cylinder back into the work bench, dropped each sleeve back in and job done.
In your case I would get the machine shop to plane the head until one even surface with the minimum amount of planing.