bkaushansky
XS650 Addict
- Messages
- 137
- Reaction score
- 2
- Points
- 18
Finishing a build and after the motor dropped into the frame and I removed the intake covers, I noticed the runner (after manifold, but before the values) had bead like varnish looking balls. About 1/16" diameter and some of the wall surface is covered is the same brown/yellow gook. Its completely hardened. Motor sat for 3 years covered up. Not about to pull the motor back out. I was thinking of closing the valves and filling the runner with 1/2 Seafoam, 1/2 gasoline and leaving overnight. Any thoughts if it will work??
Thx.
Thx.