motorbreath
XS650 Addict
it was with the capacitor, but ill isolate it and give it a spin and let ya know
pamcopete,
so should i leave the battery wire going to the ignition switch also and just run a separate wire with an inline fuse to the coil then, right? just adding a wire from battery to coil?
Sorry one more thing before i do that, i measured the volts from each skrew on the back of the key switch and was wondering if its normal for the each screw to drop from 13 volts to between 4-6 volts about every 5 seconds.
do you thing that the battery could have a bad cell?