Ok, here goes.
Pic 1. Just took the OEM bearing top/bottom.
Pic 2. Flipped it, used as spacer.
Pic 3. Put the bearing on.
Pic 4. Part # for bearing.
Pic 5. Race top(would not focus)
Pic 6. Race bottom(again, focus)
Pic 7. Clears nicely on the bottom, needs bottom spacer.
Pic 8. Top nut back on.
Pic 9. I broke my glove. You can send me a check or money order for $.03
I hope that helps.
I'd like to say those are HD bearings, but I got the bike from the PO in pieces. I can tell you they are not the tapered bearings made to fit the XS. I have a set of those, and the angle of the taper(?) is different. The OD of the races are the same. So everything else fell into place.