71 BS38 ChokePlunger02 Starter fuel inlet, plunger seat. 44 years of corrosion.
71 BS38 ChokePlunger05 Rubber tip of starter plunger can be pried out from the crimped end.
71 BS38 ChokePlunger04 Punch out some 1/4" discs of #240 wet-or-dry sandpaper. Super glue one to the squared-off end of a 5/16" shaft. Sand the sta
71 BS38 ChokePlunger03 Another view of starter plunger seat. Viewed through outlet port.
71 BS38 ChokePlunger02 Starter fuel inlet, plunger seat. 44 years of corrosion.
71 BS38 ChokePlunger01 44 year old, worn, deformed, cracked starter (choke, enrichner) plunger tip. Left carb starter plungers are not available, so
71XS1B Carbs AirJets The air jet (air bleed) diameters for this specific "E3" carburetor. Air jets MUST be cleaned to their documented diameters.
71XS1B Carbs Butterfly04 The idle stop screw is a full turn from fully closed. The 1st bypass (progressive, transition) port will now be delivering
TwoManyXS1Bs

71 BS38 ChokePlunger02 Starter fuel inlet, plunger seat. 44 years of corrosion.

There are no comments to display.

Media information

Album
1971 XS1B BS38 carburetor rebuild
Added by
TwoManyXS1Bs
Date added
View count
1,063
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top